Replacement Window Measurement Worksheet

If You Are Replacing Only The Operating Portion Of The Window And Leaving The Jambs And Trim Intact, Refer To The Replacement Window Measuring Guidelines Below.

Window measurement worksheet windows are measured and quoted by the industry standard of united inch measurements? We recommend that you add ½” to your height and width measurements. Measure from the surface of the jambs and not the trim or the parting strips in your old window opening. Measure between the interior and exterior sash stops as shown.

When Replacing Your Windows, It Is Very Important To Get Accurate Measurements Of The Opening So That The New Windows Will Fit In The Existing Hole (Unless You Are Wanting To Do A Considerable Amount Of Renovation Work To Make The Hole Bigger).

Measurements should be made to the outside of the window trim. (exact both) size, exact width and exact height. Windows are manufactured to the nearest 1/16. Measure, name and record each window size in area below.

Measuring & Ordering Worksheet 1.

Choosing the correct replacement windows requires precise measurements to ensure the perfect fit. Make sure your measurements are accurate before ordering new windows or attempting installation. Some common measuring techniques are illustrated in the figure below and may not apply to all manufacturers. Measure between the jambs at 3 points top, middle and bottom.

Report The Smallest Measurement When Ordering.

Take three measurements of the opening for both the width and height. Near the top of the window, at the middle and close to the bottom. If the width of the window is 36 inches and the height of the window is 48 inches, then you would get a total of 84 united. This slight over sizing of the mesh makes more for a forgiving and easier.